CODINA will be closed for Easter holidays from the afternoon of April 2 to April 7 (both included).

Conveyor Belt Models

At Codina Metal we manufacture a wide range of models of metal conveyor belts, adapted to different industrial processes and production needs. Each design responds to specific conditions of temperature, load and resistance, which allows us to offer reliable and durable solutions for sectors as diverse as the food industry, metallurgy, glass, automotive or logistics.

Conveyor Belt Models

Types of conveyor belts available

There are different Types of Industrial Conveyor Belts, each designed to respond to specific transportation, strength and durability needs. The choice of the appropriate model depends on factors such as the working temperature, the nature of the material to be transferred and the conditions of the production process. Here are the main models of Metal Conveyor Belts, with its technical characteristics and advantages, so that you can identify the most efficient solution for your industry, complying with international safety regulations (ISO).

Comparison of Codina Metal Conveyor Belt Models

See the comparative table of the different models of metal codina metal conveyor belts. Here you will find the main technical characteristics of each type of tape, such as the diameter of the thread, the passage of turns, distance between rods and maximum widths available. This guide will help you identify the most suitable solution for industrial, food, drying, heat treatment and transportation of products in general.

Model	Spiral thread diameter	turn of turns	Diameter Thread Rods	Distance between rods	maximum width	Notes
Type A1	0.90mm – 6mm	3mm – 45mm	1mm – 7mm	5mm – 100mm	6 m	Optional laminate for greater flatness
Type A3-A4-A5-A6	0.50 mm – 4 mm	3mm – 20mm	0.90mm – 5mm	2mm – 6.5mm	6 m	Optional laminate
Type A2	0.90 mm – 4 mm	3mm – 15mm	1mm – 4mm	5mm – 27mm	6 m	Optional laminate
Type B	0.50 mm – 4 mm	10mm – 60mm	-	-	4 m	Optional laminate
Type B1	1.50 mm – 4 mm	10mm – 35mm	1.5mm – 6mm	8mm – 30mm	4 m	Optional laminate
Type B2	0.50 mm – 3.20 mm	2mm – 10mm	0.80mm – 5mm	3.20mm – 25mm	4 m	Optional laminate
FIL-PLA TYPE	12mm x 1.20mm	44.64 mm	4 mm	27.92 mm	4 m	pinions must press rods, do not strap
Vaucanson type	-	-	4.50 mm – 6 mm	15.87 mm – 25.40 mm	1 m	It is also made in curve
MG type	1.50 mm – 3 mm	3mm – 30mm	3mm – 8mm	12.70 mm – 50.80 mm	to determine	Grommets and joint pivots
Types of crimped wires	-	-	0.90mm – 3mm	4mm – 14mm	3 m	Normally in stainless steel
alveolar type	-	-	4.50 mm – 6 mm	15.87 mm – 25.40 mm	1 m	It is also made in curve

More about our conveyor belts

Discover in detail everything that our Metal Conveyor Belts They can offer you. Explore the different models, the Side finishes available and the accessories that optimize their performance. You can also know their Multiple industrial applications, from food to automotive or logistics, always with the quality guarantee and experience of Codina Metal.

Models

formed by previously undulating wires or rods and alternately assembled.

Side finishes

We manufacture the metal filters based on raw materials that we make.

Accessories

Simple bands can be transformed into compound bands when accessories are involved in their construction.

uses and applications

Our conveyor belts have countless uses and applications. Consult them.

Technical information

Expand all technical information related to our conveyor belts.

Downloads

Consult our technical team for personalized advice.

Type A

Type A conveyor belt model, with right and left spirals connected to each other by a straight rod.

reference image

Dimension	Available range
(a) Spiral wire diameter	0.90 mm – 5 mm
(b) turn of turns	2 mm – 20 mm
(C) Thread diameter on rods	1 mm – 6 mm
(D) Distance between rods	5* mm – 100 mm
maximum width	6 m

*The spiral section (A) can also be rolled to achieve greater flatness of the tape.

Finishing options enhance the strength and functionality of the conveyor belt, adapting to different industrial applications.

Finish	Description
🔗 Linked	Greater flexibility and adaptability in transport.
🔥 Soldier	Strong and resistant to high loads and intensive use.
🏗️ Bent	Perfect for specific designs and customization.
🛠️ Others	Additional options according to technical requirements.

Accessories optimize the performance of conveyor belts, improving their functionality in various industrial processes.

Accessory	Description
🦾 Fins	They facilitate the transportation and organization of materials.
🔄 Alveoli	Use in filtration and particle separation processes.
⚙️ Chains	They ensure stability and precision in traction.

Applications

Type A1

Model A1 Wire Mesh Conveyor Belt, featuring right- and left-hand spirals interconnected by a crimped cross rod

reference image

Dimension	Available range
(a) Spiral wire diameter	0.90 mm – 6* mm
(b) turn of turns	3mm – 45mm
(C) Thread diameter on rods	1mm – 7mm
(D) Distance between rods	5mm – 100mm
maximum width	6 m

*The spiral section (A) can also be rolled to achieve greater flatness of the tape.

Los acabados laterales permiten adaptar la cinta a diferentes sistemas de guiado y arrastre, mejorando su comportamiento mecánico y su durabilidad.

Finish	Description
🔗 Linked	Greater flexibility and adaptability in transport.
🔥 Soldier	Alta resistencia estructural frente a cargas elevadas.

Los accesorios complementan la cinta transportadora y optimizan su funcionalidad, aportando soluciones específicas para el transporte de productos, la tracción o el control del flujo.

Accessory	Description
🦾 Fins	Facilitan la separación y el transporte de piezas pequeñas.
⚙️ Chains	Garantizan un arrastre preciso en sistemas motorizados.

Applications

Type A2

Model A2 Conveyor Belt, featuring a double spiral mesh wound right- and left-handed, interconnected by a straight or crimped cross rod.

reference image

Dimension	Available range
(a) Spiral wire diameter	0.90 mm – 4 mm
(b) turn of turns	3mm – 15mm
(C) Thread diameter on rods	1mm – 4mm
(D) Distance between rods	5mm – 27mm
maximum width	6 m

*The spiral section (A) can also be rolled to achieve greater flatness of the tape.

Los acabados laterales garantizan una correcta terminación de la cinta, mejorando su adaptación a distintos sistemas de transporte.

Finish	Description
🔗 Linked	Greater flexibility and ease of assembly.
🔥 Soldier	High resistance for high loads and intensive use.
🛠️ Others	Opciones especiales según requerimientos técnicos.

Los accesorios complementan el rendimiento de la cinta, aportando soluciones específicas según las necesidades del proceso.

Accessory	Description
🦾 Fins	They facilitate the separation and handling of products.

Applications

Type A3-A4-A5-A6

Model of Conveyor Belts Types A3, A4, A5, and A6, featuring right-hand and left-hand spirals interconnected by crimped cross rods. Each spiral may be linked by 3, 4, 5, or 6 rods, corresponding respectively to Types A3, A4, A5, and A6.

reference image

Dimension	Available range
(a) Spiral wire diameter	0.50 mm – 4 mm
(b) turn of turns	3mm – 20mm
(C) Thread diameter on rods	0.90mm – 5mm
(D) Distance between rods	2mm – 6.5mm
maximum width	6 m

*The spiral section (A) can also be rolled to achieve greater flatness of the tape.

The side finishes ensure a proper finish and adaptability to each type of industrial transport and guidance.

Finish	Description
🔥 Soldier	High structural strength for demanding applications.
🏗️ Bent	Versatility for projects that require customization.

Accessories complement the conveyor belt, optimizing the transport of specific products and industrial processes.

Accessory	Description
🦾 Fins	They improve the separation and organization of the transported product.

Applications

Type B

Model type B conveyor belt, with groups of coils running in one direction (right or left) bolted together with a straight reinforcing rod between each pair of coils at their point of contact; the groups of coils can be assembled in alternating sections.

reference image

Dimension	Available range
(a) Spiral wire diameter	0.50 mm – 4 mm
(b) turn of turns	10mm – 60mm
(C) Thread diameter on rods	–
(D) Distance between rods	–
maximum width	4 m

*The spiral section (A) can also be rolled to achieve greater flatness of the tape.

The side finishes guarantee the correct finish and stability of the belt during the transport of industrial products.

Finish	Description
🔗 Linked	Greater flexibility and ease of assembly.
🔥 Soldier	High structural strength for high loads.

Accessories allow for improved performance and optimized product transport according to the needs of the industrial process.

Accessory	Description
🦾 Fins	They facilitate the separation and handling of products.

Applications

Type B1

reference image

Dimension	Available range
(a) Spiral wire diameter	1.50 mm – 4 mm
(b) turn of turns	10mm – 35mm
(C) Thread diameter on rods	1.5mm – 6mm
(D) Distance between rods	8mm – 30mm
maximum width	4 m

*The spiral section (A) can also be rolled to achieve greater flatness of the tape.

Los acabados laterales ofrecen una mayor robustez y adaptabilidad según los sistemas de guiado y arrastre utilizados en el proceso.

Finish	Description
🔥 Soldier	Alta resistencia estructural y seguridad en la tracción.
🛠️ Others	Acabados personalizados para adaptarse a requerimientos específicos.

Los accesorios ayudan a mejorar la gestión y transporte eficiente del producto en procesos industriales exigentes.

Accessory	Description
🦾 Fins	Facilitan el arrastre y la organización de productos durante el transporte.

Applications

Type B2

Conveyor belt model B2, featuring double-spiral assemblies oriented in a single direction (right or left), bolted together with a straight reinforcement rod between each pair of spirals at their contact point. The spiral assemblies can be configured in alternating directional sections

reference image

Dimension	Available range
(a) Spiral wire diameter	0.50 mm – 3.20 mm
(b) turn of turns	2mm – 10mm
(C) Thread diameter on rods	0.80mm – 5mm
(D) Distance between rods	3.20mm – 25mm
maximum width	4 m

*The spiral section (A) can also be rolled to achieve greater flatness of the tape.

The side finishes ensure a proper finish and greater robustness for demanding industrial applications.

Finish	Description
🔥 Soldier	Reinforces structural strength, ideal for high loads.

Accessories complement the functionality of the conveyor belt, optimizing the handling and management of products.

Accessory	Description
🦾 Fins	They facilitate the separation and transport of products on the belt.

Applications

FIL-PLA TYPE

Conveyor FIL-PLA model, with alternatively plagued vertical plates, assembled by single or double cross rods.

reference image

Dimension	Available range
(a) Spiral wire diameter	12mm x 1.20mm
(b) turn of turns	44.64 mm
(C) Thread diameter on rods	4 mm
(D) Distance between rods	27.92 mm
maximum width	4 m

*Distribuir varios piñones a lo ancho de la cinta, dependiendo del ancho de la misma. Los piñones deben de realizar la presión sobre las varillas, nunca deben de situarse presionando sobre el fleje laminado que conforma los trapecios.

Los acabados laterales mejoran la resistencia estructural y aseguran una correcta fijación de las pletinas y varillas en la cinta Fil-Pla.

Finish	Description
🔗 Linked	Mayor flexibilidad y facilidad de montaje en aplicaciones estándar.
🔥 Soldier	Alta robustez para usos intensivos y condiciones de carga elevadas.
🏗️ Bent	Permite adaptaciones específicas según las necesidades del proyecto.

Applications

MG type

MG Model Conveyor Belt with Round Wire Mesh, featuring looped ends and transverse rods forming the connecting pivots.

reference image

Dimension	Available range
(a) Spiral wire diameter	1.50 mm – 3 mm
(b) turn of turns	3mm – 30mm
(C) Thread diameter on rods	3mm – 8mm
(D) Distance between rods	12.70 mm – 50.80 mm
maximum width	to be determined

The side finishes allow the belt to be customized to fit the specific guiding and clamping systems of each process.

Finish	Description
🛠️ Others	Special options according to technical and assembly requirements.

The accessories optimize traction and stability when transporting products on the belt.

Accessory	Description
⚙️ Chains	They improve the precision of the traction and drag of the tape.

Applications

Vaucanson type

Vaucanson model conveyor belt, with parallel stepped bars, assembled by means of lateral loops.

reference image

Dimension	Available range
(a) Spiral wire diameter	–
(b) turn of turns	–
(C) Thread diameter on rods	4.50 mm – 6 mm
(D) Distance between rods	15.87 mm – 25.40 mm
maximum width	1 m

*This model of tape is also manufactured in a curved shape with different pitches (inner and outer).

The side finishes ensure the correct fixing of the rods and the stability of the belt during operation.

Finish	Description
🔗 Linked	Flexibility and ease of assembly for standard applications.
🛠️ Others	Customized options for specific guiding and towing needs.

Accessories allow you to optimize the functionality of the belt according to the type of product and industrial process.

Accessory	Description
🔄 Alveoli	Ideal for filtration or separation processes of small particles.

Applications

Types of crimped wires

Conveyor belt model of crimped wires, with cross-shaped rods formed in the shape of a "Z" and linked together. This type of tape is positive traction by drag pinions. simple shore.

reference image

Dimension	Available range
(a) Spiral wire diameter	–
(b) turn of turns	–
(C) Thread diameter on rods	0.90mm – 3mm
(D) Distance between rods	4mm – 14mm
maximum width	3 m

*It is usually made of stainless steel.

The side finishes allow the tape to be adapted to specific guiding and drag systems, guaranteeing its correct operation.

Finish	Description
🛠️ Others	Special finishes according to the technical requirements of the project.

Applications

alveolar type

Alveolar conveyor belt with stepped parallel rods, assembled using lateral loops.

reference image

Dimension	Available range
(a) Spiral wire diameter	–
(b) turn of turns	–
(C) Thread diameter on rods	4.50 mm – 6 mm
(D) Distance between rods	15.87 mm – 25.40 mm
maximum width	1 m

*This model of tape is also manufactured in a curved shape with different pitches (inner and outer).

The side finishes allow the belt to be adapted to specific pulling and guiding needs, ensuring optimal performance.

Finish	Description
🔗 Linked	Greater flexibility and ease of assembly.
🛠️ Others	Special options according to project requirements.

The accessories optimize the performance of the belt in filtration and product separation processes.

Accessory	Description
🔄 Alveoli	They facilitate the separation and filtration of particles in industrial applications.

Conveyor Belt Models

Conveyor Belt Models

Types of conveyor belts available

Type A

Type A1

Type A2

Type A3-A4-A5-A6

Type B

Type B1

Type B2

FIL-PLA TYPE

MG type

Vaucanson type

Types of crimped wires

alveolar type

Comparison of Codina Metal Conveyor Belt Models

More about our conveyor belts

Consult our technical team for personalized advice.

Type A

Applications

Type A1

Applications

Type A2

Applications

Type A3-A4-A5-A6

Applications

Type B

Applications

Type B1

Applications

Type B2

Applications

FIL-PLA TYPE

Applications

MG type

Applications

Vaucanson type

Applications

Types of crimped wires

Applications

alveolar type

Applications

Search

Address

inactive

inactive

Download

de&/

report

2023

inactive

inactive

Download

company

profile

inactive

inactive

Download

REPORT

2022